Power Washing at a property in Chicago on West Cornelia Avenue. Completed by our Chicago Downtown team.
Chicago concrete accumulates quietly through a long season — road salt pushed up by snowmelt, soot from stop-and-go traffic, organic matter ground in by foot traffic over months. By the time we arrived at this property, the walkways had picked up a heavy, bonded layer of grime that dull rinsing alone wouldn't touch. It was the kind of buildup that only shows its full depth once you run a test strip and watch the contrast emerge.
We set up the power washing equipment and worked the concrete walkways methodically, keeping the wand at a consistent angle and distance to lift the embedded material without undercutting the surface. The soiling was significant enough that we paced the passes deliberately, letting the pressure do its job rather than rushing through. Once the surface dried back, the difference in tone across the concrete was clear. Invoice went out the same day the work wrapped.
Crew on this job
Timothy
Timothy may be our youngest technician, but don’t let that fool you. He’s experienced, professional, courteous, and already knows his way around the job like a seasoned pro. He’s also a promising DJ, so there’s a good chance he can fix the problem and recommend a solid playlist while he’s at it. Everyone loves Timothy because he’s easy to talk to, always upbeat, and genuinely enjoys meeting people. He also has a strange love for Wisconsin, which we still haven’t fully figured out - but nobody’s perfect.
Want a quote for your home?
This property is served by our Chicago Downtown office. Same-day and next-day appointments often available.
Call (773) 377-4600Showing the home's condition before our team arrived, and the result after the power washing was complete.
Before
After
Our Chicago Downtown crew filmed this power washing on site at a property in Chicago, IL.
The clip walks through how we approached the property — equipment setup, method on each side of the glass, and the tidy-up at the end.
Watch on YouTube1 N State St, Chicago IL 60602
Our Chicago Downtown crew also serves these areas.
Common questions from Chicago homeowners researching Power Washing.
Walkway power washing in Chicago typically runs between $150 and $350 depending on the square footage and how heavily soiled the surface is. This particular job came in at $200, which is right in the middle of that range for a standard residential walkway. Heavily neglected surfaces may push the price toward the higher end due to the extra time and passes required.
A walkway power wash of this scope generally takes one to two hours for a single technician. The surfaces on this job were heavily soiled, which added some extra time to ensure the grime was fully cleared rather than just surface-rinsed. Straightforward jobs with light buildup can move faster.
We wash the full surface area of the walkways, working out embedded dirt, algae, mold staining, and general grime buildup from the concrete or paver surface. On this job that meant multiple passes over heavily dirtied sections until the surface was clean and even. We clear away the loosened debris before we leave so the area is ready to use immediately.
Concrete walkways handle power washing well when the right pressure settings are used — too high and you can etch or pit the surface, too low and you won't cut through heavy buildup. We adjust pressure based on the surface condition, which is especially important on older or already-worn concrete. For a quote, call our Chicago Downtown team at (773) 377-4600.
Served by our Chicago Downtown office — same and next-day appointments often available