Power Washing at a property in Wilmette on Isabella Street. Completed by our Northbrook team.
Wilmette sits in that band of older North Shore villages where the sidewalks are wide, the tree canopy is deep, and concrete and brick surfaces accumulate a season's worth of grime before most homeowners notice it. Driveways, walkways, and exterior hardscaping here take on embedded dirt, algae creep, and general weathering that surface rinsing won't touch — the kind of buildup that calls for real pressure and a methodical pass across every square foot.
Our crew brought the power washing rig to the property and worked through the square footage systematically, keeping consistent distance and pressure to lift the grime without roughing up the underlying surface. The approach on jobs like this is straightforward but disciplined — overlapping passes, attention to edges where debris tends to concentrate, and a steady pace that lets the machine do its work rather than rushing through. When the run was finished, the surfaces were cleared of what the season had put down, and the invoice was sent once the crew wrapped and cleared the property.
Crew on this job
Ken
Want a quote for your home?
This property is served by our Northbrook office. Same-day and next-day appointments often available.
Call (847) 297-4492Showing the home's condition before our team arrived, and the result after the power washing was complete.
Before
After
Our Northbrook crew filmed this power washing on site at a property in Wilmette, IL.
The clip walks through how we approached the property — equipment setup, method on each side of the glass, and the tidy-up at the end.
Watch on YouTube2970 Maria Ave Suite 229, Northbrook IL 60062
Our Northbrook crew also serves these areas.
Common questions from Wilmette homeowners researching Power Washing.
This Wilmette property came in at $250, which is typical for a straightforward residential power washing job in the area. Most homes in the northern suburbs run anywhere from $200 to $500 depending on square footage, surface type, and how much buildup needs to be removed.
A standard residential power washing project like this one usually wraps up in two to four hours. Larger driveways, multi-story siding, or heavily stained surfaces can push that toward a half-day, but most single-family jobs are done well within an afternoon.
We handle driveways, sidewalks, patios, decks, siding, fences, and garage aprons — essentially any exterior hard surface that's built up dirt, algae, mildew, or road grime. The scope gets confirmed before we start so nothing gets missed and nothing gets hit that shouldn't.
Pressure washing uses high-pressure water alone and works well on concrete, brick, and stone where the surface can handle the force. Soft washing uses lower pressure combined with a cleaning solution, and it's the right call for vinyl siding, painted wood, or rooflines where high pressure could cause damage. We choose the method based on what the surface actually needs. For a quote, call our Northbrook team at (847) 297-4492.
Served by our Northbrook office — same and next-day appointments often available
Professional window washing, gutter cleaning & power washing across Chicago and suburbs since 2003.
